Autowatch Ghost Immobiliser Installation
The Ghost is the most advanced aftermarket in the UK. immobiliser for the CAN bus. It's subtle, doesn't have keys or LEDs and is concealed within the wiring of the vehicle.
It also allows users to disable the system temporarily by using Transport Mode to use it when they are renting their vehicle. This guide will guide you through the installation of an Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser is a advanced security device that safeguards your vehicle against key cloning, hacking and relay attacks. The system is directly connected to the ECU of your car and protected by a PIN code that you choose. It is inaccessible to thieves using diagnostic scanners or other advanced methods. It isn't able to be disabled with circuit cuts.
The system is simple to use, but professional installation is recommended to ensure a clean connection with the ECU of your vehicle. Installers certified by Thatcham can assist you with the installation and programming of your Ghost system. They can also suggest a tracking or alarm system to complete the protection package for your vehicle.
First, the installer must disconnect the battery to prevent the possibility of airbag deployment and short circuits. After this is completed, the installer can safely begin work. Hand tools are the most basic to be used to make precise connections. A multimeter is a great tool to check electrical values. Insulation tape and cable ties are also essential for protecting connections and keeping wiring tidy. The user's manual gives specific guidelines that are specific to your Ghost Immobiliser model.
During the installation process, it's crucial to select a grounding point that's free of any paint or debris. Installers should also make sure that the immobiliser's wires CAN H and can L are connected to the proper ECU ports. Based on the model, these wires might need to be soldered or plugged into. Using a quality connector is recommended to ensure a sturdy and reliable connection.
Once the install is complete, the customer can activate the Transport Mode. This allows the vehicle to be used by valet parking or mechanics without needing to know the pin code. The user must press the icon for service on the dashboard five times in two seconds. The system will confirm this by displaying 5 indicators.
The Autowatch Ghost 2 is a highly effective immobiliser that's TASSA certified and Thatcham approved. It's a smart choice for anyone who frequently rents out their cars on platforms like Turo. Immobilisers can lower insurance costs, since it decreases the likelihood of theft.
Getting Started
If you're seeking a solution to protect your vehicle from thieves You can't go wrong with an autowatch ghost immobiliser. It protects your vehicle from being started if a criminal steals or copies the key. It's possible due to its advanced technology that stops the engine from starting until the right PIN code is entered.
The device works by connecting to the CAN bus network in your vehicle and allowing it to communicate with the ECU directly. It uses buttons that are already present on the dashboard and steering wheel to create a unique sequence only you can identify which makes it impossible for anyone else to start your vehicle. This is the most secure way to protect your pride and joy. It will keep its value intact should you ever decide to sell it.
Installing a Ghost immobiliser is easy however, you must follow the directions to avoid electrical problems and system malfunctions. You must first locate a 12V power supply and a solid grounding on the car's chassis. After that, you are able to begin to connect the wires that will be used to activate the immobiliser. Use high-quality connectors and soldering techniques to ensure a secure connection. Make sure to shield the connections with heat shrink tubing, insulation tape or other materials to prevent electrical short circuits.
After the wires are connected, you can connect the battery and begin the engine to check if the immobiliser is working. Once you have verified that everything is working properly then you can put the immobiliser in a secure place inside the vehicle. Be sure to cover it well to prevent thieves from getting into it.
The Ghost 2 immobiliser has been TASSA (Tracker and Aftermarket Security System Association) that means it is a top-quality deterrent to car thieves. It is resistant to hacking and key cloning and is not able to be disabled without the code. The device is simple to use and can be set up to a service valet setting so that your vehicle won't be activated when you take it for an MOT or servicing.
Wiring
The Ghost Immobiliser, a cutting edge security system, is designed to stop theft of vehicles. It connects directly to the vehicle's CAN bus network and communicates with the ECU, making it virtually undetectable to your vehicle. The Ghost Immobiliser will not interfere with your vehicle's factory settings unlike other aftermarket systems that require the removal of circuit elements.
The system is also unnoticeable by thieves using diagnostic scanners. The system does not send or receive radio frequency signals and instead uses CAN data to communication with your ECU. In addition, it doesn't need any modification to your vehicle's existing key fobs.
To use the Ghost Immobiliser, simply switch on the ignition of your car and then enter the sequence to disarm (either one or two buttons). The indicator will flash twice to confirm that you have entered the correct code. Now you can start your vehicle and drive in a safe manner.
Once installed, the Ghost Immobiliser guards your vehicle from hacking or key cloning, while preserving its value. If you ever need to surrender your vehicle to a valet or service provider The Ghost Immobiliser can be temporarily disabled in Transport Mode.
To complete the Ghost Immobiliser installation, you'll need to locate a source of constant power (12V) and a grounding point. Make sure that both are well-insulated and able to be touched. Cable ties are also suggested to secure the wires. This will reduce the chance of theft by potential thieves. Make sure you double-check the locations of these points to avoid mistakes, and mark them with an adhesive or label. It's recommended to inspect every connection for signs of wear and tear. Connections that are loose can cause problems with the system, so be sure they're securely in place and securely insulated. Make sure to test your Ghost Immobiliser after the installation is completed. This will ensure that the unit functions correctly and that all connections and insulation are secure. If you encounter any issues, make certain to fix them immediately.
Testing
The Autowatch Ghost Immobiliser is an innovative vehicle security system that seamlessly into your car's ECU to block unauthorised engine start. The innovative technology protects your vehicle from hacking and key cloning along with other methods commonly used by thieves to steal vehicles. The Ghost is also able to work in conjunction with other alarm and tracking systems to give the most complete protection for your vehicle. The Ghost's unique features, coupled with its secluded design, make it a popular choice for car enthusiasts and security conscious drivers.
It is essential to follow the steps of installation in order to ensure a proper integration of Ghost Immobiliser. A good starting point is to consult the vehicle's wiring diagram that will serve as a roadmap for locating and connecting the necessary wires. You'll then need to identify the grounding and power sources. Once you've found them, you will have to mark them to make them easy to locate during installation. In addition, it is important to use top-quality tools and materials. Basic hand tools can assist with making precise connections and a multimeter can check electrical values and ensure safety. Insulation tape and cable tie will keep all connections neat. Additionally, a user's manual will give specific guidelines specifically tailored to your Ghost model.
Before proceeding with the installation it is important to test the system by entering the PIN code and starting the vehicle. This step will confirm the immobiliser functions as intended and will stop vehicle starts that are not authorized. It is recommended that you perform this step regularly as part of your regular vehicle inspections to ensure that the system is always functioning properly.
Once the installation is complete, you can drive your vehicle with confidence. The Ghost will keep your car and its contents safe from would-be thieves and ensure that no one can take off with your vehicle without the correct PIN code. The Ghost can also be linked with a tracker that is approved by Thatcham to detect any attempt to tamper with or steal your vehicle that could lead to the location of your vehicle if it's stolen.
The Ghost can be utilized on a variety of vehicles and is compatible with all major manufacturers. If you are interested in securing your car with this innovative device, contact Monty's Locksmith today to learn more about our installation and service options. We are a TASSA Installer who is registered which guarantees that we follow strict standards and procedures for installing our products. This assures insurance companies, customers and law enforcement officials that all installations are performed safely and correctly.